Question 1

How long does warehouse epoxy flooring installation take?

Accepted Answer

Most warehouse projects are completed in 2–5 days depending on square footage, surface condition, and the number of coats specified. We schedule around operational needs and can phase installations by zone to keep part of the facility operational during the project.

Question 2

Can you install epoxy over an existing floor coating?

Accepted Answer

It depends on the condition of the existing coating. If the current coating is properly bonded, we can mechanically abrade it and apply a new system over it. If it is delaminating, bubbling, or poorly bonded, it has to come off first. We assess this during the site visit.

Question 3

How long does warehouse epoxy flooring last?

Accepted Answer

A properly specified and installed high-build epoxy system in a warehouse environment typically lasts 10–15 years before it needs a recoat, assuming normal maintenance and no catastrophic chemical exposure events. Proper surface prep and moisture testing at installation are the biggest factors in long-term performance.

Question 4

What does warehouse epoxy flooring cost in Tampa?

Accepted Answer

Most warehouse epoxy installations in Tampa range from $3–8 per square foot depending on system type, slab condition, square footage, and whether moisture mitigation is required. Large projects with accessible, well-prepared slabs come in at the lower end. Projects requiring significant remediation or a multi-coat system will run higher. We provide itemized estimates.

Question 5

Do you handle the safety striping as part of the project?

Accepted Answer

Yes. We install safety striping and line marking as part of the floor installation. This is more durable than striping applied over an existing floor after the fact.

Warehouse Epoxy Flooring in Tampa, FL